CAN OBD2 auto scanner GS400

The new generation of automotive code readers that support Controller Area
Network(CAN) protocol has arrived. The newmodel GS400 CAN OBD2 auto scanner
 supports all OBD2 protocols, including the newly released Controller Area
 Network(CAN) protocol, allowing users to keep up with the latest development
 in automotive diagnostic scanning.

Feature:
●　Reads Generic Codes(P0, p2, p3, U0) and Manufacturer Specific Codes (P1, P3, and U1)
●　Erases trouble codes and Resets Check Engine Lights
●　Displays I/M Readiness Status and state OBD check
●　Detects OBD2 Freeze Frame Information
●　Determines the malfunction indicator lamp(MIL) status
●　Identifies and Displays Pending Codes
●　Retrieves VIN(Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
●　Wider vehicle coverage with CAN Protocol support
●　Displays Total # of Codes Retrieved
●　Code definitions displayed on unit screen
●　Memory/battery backup for off-vehicle data review and analysis
●　Unit upgradeable via flash programming
●　Easy to use with friendly menu interface
●　Large, 128 x 64 easy-to-read backlit LCD display with adjustable contrast
●　Hot Keys for quick READ & ERASE
●　Detachable and replaceable 16-pin OBD2 cable

Specifications
1  Display: 128 x 64 backlit LCD display
2　Operating Temperature: 0 to 50°C (-32 to 122 F°)
3　Storage Temperature: -20 to 70°C (-4 to 158 F°)
4　External Power: 10.0 to 15.5 Volts provided via vehicle battery
5　Internal Power: 9V Cell
6　Dimensions:
　　 Length　　　　　　　 Width　　　　　　　 Height
　200 mm (7.8”) 　　　90 mm (3.5”)　　　 34mm (1.3”)
7　NW: 0.60 Kg(1.3lb), GW: 0.80Kg(1.8lb)